Hire Fluke 773

About this equipment

• Measure 4 to 20 mA signals without ”breaking the loop” just like the innovative and popular Fluke 771 Process Milliamp Clampmeter 
• Source 4 to 20 mA signals for testing control system I/O or I/Ps 
• Simulate 4 to 20 mA signals for testing control system I/O 
• Measure 4 to 20 mA signals with in-circuit measurement 
• Simultaneously measure mA in-circuit with 24 V loop power for powering and testing transmitters 
• Source mA output signals in a linear ramp or 25 % step output – Automatically change the 4 to 20 mA output for remote testing 
• Power saving features, auto-off, backlight timeout extend battery life
• DC voltage measurement to verify 24 V power supplies or voltage I/O signals
• Source dc voltage to test input devices that accept a 1 to 5 volt or 0 to 10 volt signal 
• Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp – Output mA signal enables a logging DMM or other device to record the 4 to 20 mA signal without breaking the loop 
• mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal – Apply a mA input signal to a device and measure its’ 4 to 20 mA output on devices such as valves or mA isolators 
• Voltage output linear ramp or 25 % step output – Automatically change the voltage output for remote testing